2024-06-07

The working principle of the tablet press

1.The basic parts of the tablet press Punch and die: Punch and die are the basic parts of the tablet press, and each pair of punches is composed of three parts: upper punch, middle die and lower punch. The structure of the upper and lower punches is similar, and the diameters of the punches are also the same. The punches of the upper and lower punches are matched with the die holes of the middle die, and can slide up and down freely in the middle die hole, but there will be n...

2024-06-07

Small knowledge of tablet press

Tablet presses are mainly used for tablet process research in the pharmaceutical industry. The tablet press is an automatic continuous production equipment for compressing the granules into round, special-shaped and sheet-like objects with characters, symbols and graphics with a diameter of not more than 13mm. For some pharmaceutical tablet presses, when burrs and dust appear during tablet compression, the sieve machine should be equipped with dust removal at the same time (m...